Please use this identifier to cite or link to this item:
- Influence of viscosity and ionic concentration on morphology of PLZT thin films
- Universidade Estadual Paulista (UNESP)
- University of Belgrade
- PLZT thin films were prepared by a dip-coating process using Pechini's method. The PLZT solution was obtained from the mixture of the cation solutions. The viscosity of the solution was adjusted in the range of 20-40 cP, while the ionic concentration was adjusted in the range of 0.1 and 0.2 M. PLZT solutions were deposited on Si (1 0 0) substrate with withdrawal speed at 5 mm/min. The coated substrates were thermally treated with heating rate of 1 degreesC/min up to 300 and 5 degreesC/ min up to 650 degreesC in order to obtain homogeneous and crack free films. The influence of viscosity and ionic concentration on crystallization and morphology of PLZT (9/65/35) thin film will be discussed. (C) 2001 Elsevier B.V. B.V. All rights reserved.
- Applied Surface Science. Amsterdam: Elsevier B.V., v. 172, n. 1-2, p. 68-74, 2001.
- Elsevier B.V.
- X-ray diffraction
- electron microscopy
- Acesso restrito
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.