Please use this identifier to cite or link to this item:
- Effect of ceria content on the sintering of ZrO2 based ceramics synthesized from a polymeric precursor
- Universidade Estadual Paulista (UNESP)
- Comiss Nacl Energie Nucl
- Universidade Federal de São Carlos (UFSCar)
- Zirconia-ceria powders with ceria concentration varying from 0 to 12 mol% were synthesized using a polymeric precursor route based on the Pechini process. Powder characteristics were evaluated with regard to the crystallite size, BET surface area, phase distribution, nitrogen adsorption/desorption behavior, and agglomeration state. Sintering was studied considering the shrinkage rate, densification, grain size, and phase evolution. It was demonstrated that the synthesis method is effective to prepare nanosized powders of tetragonal zirconia single-phase. Sinterability mainly depended on the agglomeration state of powders and the monoclinic phase content, fully tetragonal zirconia ceramic, with grain size of 2.4 mu m, was obtained after addition of at least 9 mol% ceria and sintering at 1500 degrees C for 4 h. (C) 2000 Elsevier B.V. Ltd. All rights reserved.
- Journal of the European Ceramic Society. Oxford: Elsevier B.V., v. 20, n. 8, p. 1077-1084, 2000.
- Elsevier B.V.
- powders-chemical preparation
- Acesso restrito
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.