Please use this identifier to cite or link to this item:
- Deposition of controlled thickness ultrathin SnO2 : Sb films by spin-coating
- Universidade Federal de São Carlos (UFSCar)
- Universidade Estadual Paulista (UNESP)
- Universidade Federal de Ouro Preto (UFOP)
- The technological interest in transparent conductive oxide films (TCOs) has motivated several works in processing techniques, in order to obtain adequate routes to application. In this way, this work describes a new route to obtain antimony-doped tin oxide (ATO) films, based in colloidal dispersions of oxide nanocrystals. The nanoparticles were obtained by a hydrolisis method, using SnCl2 and SbCl3 in ethanolic solutions. The residual halides were removed by dyalisis, obtaining a limpid and transparent colloidal suspension. By this, the method offers the advantage of producing ultrathin films without organic contaminants. This route was employed to produce films with 5, 10, 14, and 18 mol% Sb doping, with thickness ranging from 40 to 70 nm. The physical characterization of the samples showed a uniform layer deposition, resulting in good packing density and high transmittance. A preliminar electrical study confirmed the low electrical resistivity even in the ultrathin films, in such level similar of reported data. The method described is similar in some aspects to layer-by-layer (LbL) techniques, allowing fine control of thickness and interesting properties for ultrathin films, however, with low cost when compared to similar routes.
- Journal of Nanoscience and Nanotechnology. Valencia: Amer Scientific Publishers, v. 6, n. 12, p. 3849-3853, 2006.
- Amer Scientific Publishers
- thin films
- tin oxide
- Acesso restrito
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.