Please use this identifier to cite or link to this item:
- Thermoplastic starch/natural rubber blends
- Ecol Francaise Papeterie & Ind Graph
- Universidade Federal de São Paulo (UNIFESP)
- Universidade Estadual Paulista (UNESP)
- Thermoplastic starch/natural rubber polymer blends were prepared using directly natural latex and cornstarch. The blends were prepared in an intensive batch mixer at 150 degreesC, with natural rubber content varying from 2.5 to 20%. The blends were characterised by mechanical analysis (stress-strain) and by scanning electron microscopy. The results revealed a reduction in the modulus and in tensile strength, becoming the blends less brittle than thermoplastic starch alone. Phase separation was observed in some compositions and was dependent on rubber and on plasticiser content (glycerol). Increasing plasticiser content made possible the addition of higher amounts of rubber. The addition of rubber was, however, limited by phase separation the appearance of which depended on the glycerol content. Scanning electron microscopy showed a good dispersion of the natural rubber in the continuos phase of thermoplastic starch matrix. (C) 2003 Elsevier B.V. Ltd. All rights reserved.
- Carbohydrate Polymers. Oxford: Elsevier B.V., v. 53, n. 1, p. 95-99, 2003.
- Elsevier B.V.
- natural rubber
- biodegradable blends
- Acesso restrito
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.