Você está no menu de acessibilidade

Utilize este identificador para citar ou criar um link para este item: http://acervodigital.unesp.br/handle/11449/74322
Título: 
The seismic SPT to determine the maximum shear modulus
Autor(es): 
Instituição: 
Universidade Estadual Paulista (UNESP)
Resumo: 
This paper presents the first results of a system to carry out seismic SPT, which associates the up-hole seismic technique to the currently used SPT test. This hybrid test allows determining the maximum shear modulus (G 0) together with the SPT test. G 0 is the most important dynamic soil parameter and it is calculated based on the shear wave velocity (V S) measurements. The equipment and the method of analysis will be briefly described. The V s values measured using the S-SPT in one experimental research site located inland of Sao Paulo State-Brazil are presented and compared with down-hole and Seismic CPT test data. These preliminary results indicate that the S-SPT was satisfactory and can be used for dynamic site characterization.
Data de publicação: 
1-Jan-2013
Citação: 
Geotechnical and Geophysical Site Characterization 4 - Proceedings of the 4th International Conference on Site Characterization 4, ISC-4, v. 1, p. 337-342.
Duração: 
337-342
Palavras-chaves: 
  • G 0
  • SPT test
  • Up-hole
  • V s
  • Experimental research
  • Hybrid tests
  • Maximum shear modulus
  • Method of analysis
  • Sao Paulo
  • Seismic technique
  • Shear wave velocity
  • Site characterization
  • Soil parameters
  • Test data
Fonte: 
http://www.crcnetbase.com/doi/abs/10.1201/b13251-34
Endereço permanente: 
Direitos de acesso: 
Acesso restrito
Tipo: 
outro
Fonte completa:
http://repositorio.unesp.br/handle/11449/74322
Aparece nas coleções:Artigos, TCCs, Teses e Dissertações da Unesp

Não há nenhum arquivo associado com este item.
 

Itens do Acervo digital da UNESP são protegidos por direitos autorais reservados a menos que seja expresso o contrário.