Please use this identifier to cite or link to this item:
- A model to predict R134a refrigerant leakage through the radial clearance of rolling piston compressors
- Universidade Estadual Paulista (UNESP)
- Department of Mechanical Engineering at Unesp-Ilha Solteira
- In this paper a non-isothermal two-phase model for oil-R134a refrigerant mixture flow is presented to predict the R134a leakage through the radial clearance of rolling piston compressors. The flow is divided in a liquid single-phase region and in a two-phase region, in which the homogeneous model is used to simulate the flow. The refrigerant leakage is determined using the mixture mass flow rate and the refrigerant mass fraction variation along the flow. The results are obtained for inlet pressures varying from 200 to 700 kPa, inlet temperatures ranging from 40 to 60 degrees C, and minimal clearances between 10 and 60 mu m. The results are firstly compared to existing isothermal model data, showing that there is a significant difference between the leakage flow rates predicted by isothermal and non-isothermal models. Finally, a useful general equation for compressor designers is proposed to calculate the refrigerant leakage for a large range of operation conditions. (C) 2012 Elsevier Ltd and IIR. All rights reserved.
- International Journal of Refrigeration-revue Internationale Du Froid. Oxford: Elsevier B.V., v. 35, n. 8, p. 2223-2232, 2012.
- Elsevier B.V.
- Rolling piston
- Radial clearance
- Oil-R134a mixture
- Refrigerant leakage
- Acesso restrito
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.