You are in the accessibility menu

Please use this identifier to cite or link to this item: http://acervodigital.unesp.br/handle/11449/111862
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAlves, Luciane Simal-
dc.contributor.authorMello da Silva, Sergio Augusto-
dc.contributor.authorAzambuja, Maximiliano dos Santos-
dc.contributor.authorVaranda, Luciano Donizeti-
dc.contributor.authorChristoforo, Andre Luis-
dc.contributor.authorRocco Lahr, Francisco Antonio-
dc.contributor.authorSung, W. P.-
dc.contributor.authorChen, R.-
dc.date.accessioned2014-12-03T13:09:02Z-
dc.date.accessioned2016-10-25T20:09:54Z-
dc.date.available2014-12-03T13:09:02Z-
dc.date.available2016-10-25T20:09:54Z-
dc.date.issued2014-01-01-
dc.identifierhttp://dx.doi.org/10.4028/www.scientific.net/AMR.884-885.689-
dc.identifier.citationBiotechnology, Chemical And Materials Engineering Iii, Pts 1 And 2. Stafa-zurich: Trans Tech Publications Ltd, v. 884-885, p. 689-693, 2014.-
dc.identifier.issn1022-6680-
dc.identifier.urihttp://hdl.handle.net/11449/111862-
dc.identifier.urihttp://acervodigital.unesp.br/handle/11449/111862-
dc.description.abstractThis study aimed to investigate physical performance of particleboards produced with waste from sawmills, containing different wood species, and two adhesives: urea-formaldehyde (UF) based resin and castor-oil (PU) based bi-component polyurethane resin. Panels were produced with nominal density 0.8gcm(-3); pressing temperature 110 degrees C; pressing time 10 min; specific pressure 5 MPa. Water absorption (2 and 24h); thickness swelling (2 and 24h); density; and moisture content were investigated. Results confirmed that the produced panels presented compatible physical properties in comparison with other researches referred in literature, proving the feasibility of inputs employed. Panels produced PU showed better performance than those produced with UF.en
dc.format.extent689-693-
dc.language.isoeng-
dc.publisherTrans Tech Publications Ltd-
dc.sourceWeb of Science-
dc.subjectPhysical propertiesen
dc.subjectresiduesen
dc.subjecttimberen
dc.titleParticleboard produced with sawmill waste of different wood speciesen
dc.typeoutro-
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.description.affiliationSao Paulo State Univ UNESP, BR-15385000 Ilha Solteira, SP, Brazil-
dc.description.affiliationUnespSao Paulo State Univ UNESP, BR-15385000 Ilha Solteira, SP, Brazil-
dc.identifier.doi10.4028/www.scientific.net/AMR.884-885.689-
dc.identifier.wosWOS:000337848900152-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofBiotechnology, Chemical And Materials Engineering Iii, Pts 1 And 2-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.
Show simple item record Show full item record   View Statistics
 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.