You are in the accessibility menu

Please use this identifier to cite or link to this item: http://acervodigital.unesp.br/handle/11449/117436
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBattistelle, Rosane-
dc.contributor.authorViola, Natalia Martin-
dc.contributor.authorBezerra, Barbara Stolte-
dc.contributor.authorValarelli, Ivaldo De Domenico-
dc.date.accessioned2015-03-18T15:56:08Z-
dc.date.accessioned2016-10-25T20:35:21Z-
dc.date.available2015-03-18T15:56:08Z-
dc.date.available2016-10-25T20:35:21Z-
dc.date.issued2014-01-01-
dc.identifierhttp://dx.doi.org/10.1590/S1517-70762014000100003-
dc.identifier.citationMateria-rio De Janeiro. Rio De Janeiro Rj: Univ Fed Rio De Janeiro, Lab Hidrogenio, v. 19, n. 1, p. 7-15, 2014.-
dc.identifier.issn1517-7076-
dc.identifier.urihttp://hdl.handle.net/11449/117436-
dc.identifier.urihttp://acervodigital.unesp.br/handle/11449/117436-
dc.description.abstractRecycled polymer matrix composites reinforced with wood flour can be a viable alternative for the replacement of wood and virgin polymers in materials used in floors, door frames, windows and external cladding. The objective of this research was to determine some physical and mechanical parameters of composite made with Pinus taeda and elliottii wood flour (WF) and recycled polypropylene (PP), without the use of compatibilizers or additives. The composites were separated into four traits, namely 100% PP, 90% PP with 10%, WF 80% PP with 20% WF and 70 % PP with 30% WF. The characterization of the composite followed the standards ASTM D-638-10, ASTM D256-00, ASTM D570 -98, ASTM D1238 -10 and ASTM G 155-05, it was also employed the surface analysis by scanning electron microscopy. The dimensional stability tests showed satisfactory results. Even the composite with a higher percentage of wood flour (30%) had a flow index of 10 MFI, considered compatible with that observed for PP (polypropylene) virgin by standard ASTM D 1238-10. The inclusion of wood flour (FM) afforded composites with good mechanical characteristics which can be applied in manufacture of different materials, specifically employed outdoors.en
dc.format.extent7-15-
dc.language.isopor-
dc.publisherUniv Fed Rio De Janeiro, Lab Hidrogenio-
dc.sourceWeb of Science-
dc.subjectWood flouren
dc.subjectrecycle polypropyleneen
dc.subjectcompositesen
dc.subjectwaste recoveryen
dc.titlePhysical and mechanical characterization of a recycled polypropylene and wood flour without additivesen
dc.typeoutro-
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.description.affiliationUniv Estadual Paulista Julio de Mesquita Filho UN, FEB, Programa Posgrad Engn Prod, Sao Paulo, Brazil-
dc.description.affiliationUnespUniv Estadual Paulista Julio de Mesquita Filho UN, FEB, Programa Posgrad Engn Prod, Sao Paulo, Brazil-
dc.identifier.doi10.1590/S1517-70762014000100003-
dc.identifier.wosWOS:000340432700003-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofMateria-rio De Janeiro-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.
 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.