You are in the accessibility menu

Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKostov, Konstantin Georgiev-
dc.contributor.authorMachida, Munemasa-
dc.contributor.authorPrysiazhnyi, Vadym-
dc.contributor.authorHonda, Roberto Y.-
dc.identifier.citationPlasma Sources Science &technology. Bristol: Iop Publishing Ltd, v. 24, n. 2, 7 p., 2015.-
dc.description.abstractThis work proposes an experimental configuration for the generation of a cold atmospheric pressure plasma jet at the downstream end of a long flexible plastic tube. The device consists of a cylindrical dielectric chamber where an insulated metal rod that serves as high-voltage electrode is inserted. The chamber is connected to a long (up to 4 m) commercial flexible plastic tube, equipped with a thin floating Cu wire. The wire penetrates a few mm inside the discharge chamber, passes freely (with no special support) along the plastic tube and terminates a few millimeters before the tube end. The system is flushed with Ar and the dielectric barrier discharge (DBD) is ignited inside the dielectric chamber by a low frequency ac power supply. The gas flow is guided by the plastic tube while the metal wire, when in contact with the plasma inside the DBD reactor, acquires plasma potential. There is no discharge inside the plastic tube, however an Ar plasma jet can be extracted from the downstream tube end. The jet obtained by this method is cold enough to be put in direct contact with human skin without an electric shock. Therefore, by using this approach an Ar plasma jet can be generated at the tip of a long plastic tube far from the high-voltage discharge region, which provides the safe operation conditions and device flexibility required for medical treatment.en
dc.description.sponsorshipFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)-
dc.description.sponsorshipConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)-
dc.publisherIop Publishing Ltd-
dc.sourceWeb of Science-
dc.subjectCold plasma jeten
dc.subjectDielectric barrier discharge (DBD)en
dc.subjectAtmospheric plasmaen
dc.subjectPlastic tubeen
dc.titleTransfer of a cold atmospheric pressure plasma jet through a long flexible plastic tubeen
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.contributor.institutionUniversidade Estadual de Campinas (UNICAMP)-
dc.description.affiliationUniv Estadual Paulista UNESP, BR-12516410 Guaratingueta, SP, Brazil-
dc.description.affiliationUniv Estadual Campinas UNICAMP, Inst Fis IFGW, BR-13083859 Campinas, SP, Brazil-
dc.description.affiliationUnespUniv Estadual Paulista UNESP, BR-12516410 Guaratingueta, SP, Brazil-
dc.description.sponsorshipIdFAPESP: 2013/06732-3-
dc.description.sponsorshipIdCNPq: 470995/2013-0-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofPlasma Sources Science &technology-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.