You are in the accessibility menu

Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWatanabe, Mauricio U.-
dc.contributor.authorAnchieta, Rodolfo Bruniera-
dc.contributor.authorRocha, Eduardo Passos-
dc.contributor.authorKina, Sidney-
dc.contributor.authorde Almeida, Erika Oliveira-
dc.contributor.authorFreitas Junior, Amilcar Chagas-
dc.contributor.authorBasting, Roberta Tarkany-
dc.identifier.citationJournal of Prosthodontics-implant Esthetic and Reconstructive Dentistry. Hoboken: Wiley-blackwell, v. 21, n. 4, p. 304-311, 2012.-
dc.description.abstractPurpose: This study used the 3D finite element (FE) method to evaluate the mechanical behavior of a maxillary central incisor with three types of dowels with variable heights of the remaining crown structure, namely 0, 1, and 2 mm. Materials and Methods: Based on computed microtomography, nine models of a maxillary central incisor restored with complete ceramic crowns were obtained, with three ferrule heights (0, 1, and 2 mm) and three types of dowels (glass fiber = GFD; nickel-chromium = NiCr; gold alloy = Au), as follows: GFD0 restored with GFD with absence (0 mm) of ferrule; GFD1 similar, with 1 mm ferrule; GFD2 glass fiber with 2 mm ferrule; NiCr0 restored with NiCr alloy dowel with absence (0 mm) of ferrule; NiCr1 similar, with 1 mm ferrule; NiCr2 similar, with 2 mm ferrule; Au0 restored with Au alloy dowel with absence (0 mm) of ferrule; Au1 similar, with 1 mm ferrule; Au2 similar, with 2 mm ferrule. A 180 N distributed load was applied to the lingual aspect of the tooth, at 45 degrees to the tooth long axis. The surface of the periodontal ligament was fixed in the three axes (x = y = z = 0). The maximum principal stress (smax), minimum principal stress (smin), equivalent von Mises (svM) stress, and shear stress (sshear) were calculated for the remaining crown dentin, root dentin, and dowels using the FE software. Results: The smax (MPa) in the crown dentin were: GFD0 = 117; NiCr0 = 30; Au0 = 64; GFD1 = 113; NiCr1 = 102; Au1 = 84; GFD2 = 102; NiCr2 = 260; Au2 = 266. The smax (MPa) in the root dentin were: GFD0 = 159; NiCr0 = 151; Au0 = 158; GFD1 = 92; NiCr1 = 60; Au1 = 67; GFD2 = 97; NiCr2 = 87; Au2 = 109. Conclusion: The maximum stress was found for the NiCr dowel, followed by the Au dowel and GFD; teeth without ferrule are more susceptible to the occurrence of fractures in the apical root third.en
dc.description.sponsorshipFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)-
dc.description.sponsorshipCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)-
dc.sourceWeb of Science-
dc.subjectCrown ferruleen
dc.subjectglass fiber dowelen
dc.subjectmetallic casten
dc.subjectfinite element analysisen
dc.titleInfluence of Crown Ferrule Heights and Dowel Material Selection on the Mechanical Behavior of Root-Filled Teeth: A Finite Element Analysisen
dc.contributor.institutionCtr Pesquisas Odontol-
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.description.affiliationCtr Pesquisas Odontol, Sao Leopoldo Mandic, Brazil-
dc.description.affiliationSão Paulo State Univ UNESP, Fac Dent Aracatuba, Dept Dent Mat & Prosthodont, Aracatuba, SP, Brazil-
dc.description.affiliationUnespSão Paulo State Univ UNESP, Fac Dent Aracatuba, Dept Dent Mat & Prosthodont, Aracatuba, SP, Brazil-
dc.description.sponsorshipIdFAPESP: 08/00209-9-
dc.description.sponsorshipIdCAPES: BEX 2325-05-5-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofJournal of Prosthodontics-implant Esthetic and Reconstructive Dentistry-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.