Você está no menu de acessibilidade

Utilize este identificador para citar ou criar um link para este item: http://acervodigital.unesp.br/handle/11449/16448
Título: 
Effect of microwave disinfection on the bond strength of denture teeth to acrylic resins
Autor(es): 
Instituição: 
Universidade Estadual Paulista (UNESP)
ISSN: 
0143-7496
Resumo: 
During microwave disinfection, the dentures are exposed to water at high temperature and this may affect the bond between the denture teeth and the acrylic resin from which dentures are made. In this study, a shear test was used to evaluate the effect of microwave disinfection (650W/6 min) on the bond strength of two types of denture teeth to three acrylic resins, with different polymerization methods. The specimens were submitted to the shear tests (0.5 mm/min) after: immersion in water (37 degrees C) for 48 h or 8 days (controls); two or seven cycles of microwave disinfection (test groups). Data (MPa) were analyzed using three-way ANOVA and Tukey HSD test (alpha = 0.05). Microwave disinfection did not adversely affect the bond strength of all tested materials with the exception of QC-20 bonded to SR Vivodent PE, for which a significant reduction was recorded after seven cycles of irradiation. (C) 2007 Elsevier Ltd. All rights reserved.
Data de publicação: 
1-Set-2008
Citação: 
International Journal of Adhesion and Adhesives. Oxford: Elsevier B.V., v. 28, n. 6, p. 296-301, 2008.
Duração: 
296-301
Publicador: 
Elsevier B.V.
Palavras-chaves: 
  • interfaces
  • adhesion by chemical bonding
  • fracture
  • acrylic resins
Fonte: 
http://dx.doi.org/10.1016/j.ijadhadh.2007.09.002
Endereço permanente: 
Direitos de acesso: 
Acesso restrito
Tipo: 
outro
Fonte completa:
http://repositorio.unesp.br/handle/11449/16448
Aparece nas coleções:Artigos, TCCs, Teses e Dissertações da Unesp

Não há nenhum arquivo associado com este item.
 

Itens do Acervo digital da UNESP são protegidos por direitos autorais reservados a menos que seja expresso o contrário.