You are in the accessibility menu

Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorCavalcanti Queiroz, Jose Renato-
dc.contributor.authorBenetti, Paula-
dc.contributor.authorOezcan, Mutlu-
dc.contributor.authorCappa de Oliveira, Luiz Fernando-
dc.contributor.authorDella Bona, Alvaro-
dc.contributor.authorTakahashi, Fernando Eidi-
dc.contributor.authorBottino, Marco Antonio-
dc.identifier.citationDental Materials. Oxford: Elsevier B.V., v. 28, n. 2, p. 189-196, 2012.-
dc.description.abstractObjectives. This study characterized the feldspathic ceramic surfaces after various silanization protocols.Methods. Ceramic bars (2 mm x 4 mm x 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were ultrasonically cleaned in distilled water for 10 min. The ceramic specimens were randomly divided into nine groups (N = 2 per group) and were treated with different silane protocols. MPS silane (ESPE-Sil, 3M ESPE) was applied to all specimens and left to react at 20 degrees C for 2 min (G20). After drying, the specimens were subjected to heat treatment in an oven at 38 degrees C (G38), 79 degrees C (G79) or 100 degrees C (G100) for 1 min. Half of the specimens of each group were rinsed with water at 80 degrees C for 15 s (G20B, G38B, G79B, G100B). The control group (GC) received no silane. Attenuated total reflection infrared Fourier transform analysis (ATR FT-IR) was performed using a spectrometer. Thickness of silane layer was measured using a spectroscopic ellip-someter working in the lambda = 632.8 nm (He-Ne laser) at 70 degrees incidence angle. Surface roughness was evaluated using an optical profilometer. Specimens were further analyzed under the Scanning Electron Microscopy (SEM) to observe the topographic patterns.Results. ATR FT-IR analysis showed changes in Si-O peaks with enlarged bands around 940 cm(-1). Ellipsometry measurements showed that all post-heat treatment actions reduced the silane film thickness (30.8-33.5 nm) compared to G20 (40 nm). The groups submitted to rinsing in hot water (B groups) showed thinner silane films (9.8-14.4 nm) than those of their corresponding groups (without washing) (30.8-40 nm). Profilometer analysis showed that heat treatments (Ra approximate to 0.10-0.19 mu m; Rq approximate to 0.15-0.26 mu m) provided a smoother surface than the control group (Ra approximate to 0.48 mu m; Rq approximate to 0.65 mu m). Similar patterns were also observed in SEM images.Significance. Heat treatment after MPS silane application improved the silane layer network. Rinsing with boiling water eliminated the outmost unreacted regions of the silane yielding to thinner film thicknesses. (C) 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.en
dc.publisherElsevier B.V.-
dc.sourceWeb of Science-
dc.subjectSilane coupling agenten
dc.subjectSurface characterizationen
dc.titleSurface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocolsen
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.contributor.institutionUniv Zurich-
dc.contributor.institutionUniversidade Federal de Juiz de Fora (UFJF)-
dc.contributor.institutionUniv Passo Fundo-
dc.description.affiliationSão Paulo State Univ, Dept Prosthodont & Dent Mat, Sao Jose Dos Campos, Brazil-
dc.description.affiliationUniv Zurich, Dent Mat Unit, Clin Fixed & Removable Prosthodont & Dent Mat Sci, Ctr Dent & Oral Med, Zurich, Switzerland-
dc.description.affiliationUniv Fed Juiz de Fora, Dept Chem, Juiz de Fora, Brazil-
dc.description.affiliationUniv Passo Fundo, Dept Restorat Dent, Passo Fundo, Brazil-
dc.description.affiliationUnespSão Paulo State Univ, Dept Prosthodont & Dent Mat, Sao Jose Dos Campos, Brazil-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofDental Materials-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.