You are in the accessibility menu

Please use this identifier to cite or link to this item: http://acervodigital.unesp.br/handle/11449/32890
Full metadata record
DC FieldValueLanguage
dc.contributor.authorVarela, José Arana-
dc.contributor.authorCerri, J. A.-
dc.contributor.authorLeite, E. R.-
dc.contributor.authorLongo, Elson-
dc.contributor.authorShamsuzzoha, M.-
dc.contributor.authorBradt, R. C.-
dc.date.accessioned2014-05-20T15:21:46Z-
dc.date.accessioned2016-10-25T17:55:19Z-
dc.date.available2014-05-20T15:21:46Z-
dc.date.available2016-10-25T17:55:19Z-
dc.date.issued1999-01-01-
dc.identifierhttp://dx.doi.org/10.1016/S0272-8842(98)00032-7-
dc.identifier.citationCeramics International. Oxford: Elsevier B.V., v. 25, n. 3, p. 253-256, 1999.-
dc.identifier.issn0272-8842-
dc.identifier.urihttp://hdl.handle.net/11449/32890-
dc.identifier.urihttp://acervodigital.unesp.br/handle/11449/32890-
dc.description.abstractAddition of 0.5 mol% of CoO into SnO2 promotes densification of this oxide to 99% of the theoretical density during sintering. TEM in this system reveals that after sintering at 1210 degrees C a secondary phase of Co2SnO4 is precipitated at the SnO2 grain boundaries during cooling. This phase is formed by diffusion of Co ions from the bulk to the grain boundary during sintering leaving needle-like defects at the grain bulk. The high resolution TEM micrograph of this system sintered at 1210 degrees C and 1400 degrees C showed an amorphous grain boundary region low in cobalt, indicating that the Co2SnO4 phase is precipitated from this region. (C) 1999 Elsevier B.V. Limited and Techna S.r.l. All rights reserved.en
dc.format.extent253-256-
dc.language.isoeng-
dc.publisherElsevier B.V.-
dc.sourceWeb of Science-
dc.titleMicrostructural evolution during sintering of CoO doped SnO2 ceramicsen
dc.typeoutro-
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.contributor.institutionUniversidade Federal de São Carlos (UFSCar)-
dc.contributor.institutionUniv Alabama-
dc.description.affiliationUNESP, Inst Quim, BR-14800 Araraquara, SP, Brazil-
dc.description.affiliationUniv Fed Sao Carlos, Dept Quim, BR-13560 Sao Carlos, SP, Brazil-
dc.description.affiliationUniv Alabama, Dept Met & Mat Engn, Tuscaloosa, AL 35487 USA-
dc.description.affiliationUnespUNESP, Inst Quim, BR-14800 Araraquara, SP, Brazil-
dc.identifier.doi10.1016/S0272-8842(98)00032-7-
dc.identifier.wosWOS:000079365800008-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofCeramics International-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.
 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.