Utilize este identificador para citar ou criar um link para este item:
http://acervodigital.unesp.br/handle/11449/64708
Registro de metadados completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Canesin, Carlos A. | - |
dc.contributor.author | Barbi, Ivo | - |
dc.date.accessioned | 2014-05-27T11:18:03Z | - |
dc.date.accessioned | 2016-10-25T18:13:42Z | - |
dc.date.available | 2014-05-27T11:18:03Z | - |
dc.date.available | 2016-10-25T18:13:42Z | - |
dc.date.issued | 1996-01-01 | - |
dc.identifier | http://dx.doi.org/10.1109/APEC.1996.500532 | - |
dc.identifier.citation | Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, v. 2, p. 807-813. | - |
dc.identifier.uri | http://hdl.handle.net/11449/64708 | - |
dc.identifier.uri | http://acervodigital.unesp.br/handle/11449/64708 | - |
dc.description.abstract | This paper presents the analysis and the design of a peak-current-controlled high-power-factor boost rectifier, with slope compensation, operating at constant frequency. The input current shaping is achieved, with continuous inductor current mode, with no multiplier to generate a current reference. The resulting overall circuitry is very simple, in comparison with the average-current-controlled boost rectifier. Experimental results are presented, taken from a laboratory prototype rated at 370 W and operating at 67 kHz. The measured power factor was 0.99, with a input current THD equal to 5.6%, for an input voltage THD equal to 2.26%. | en |
dc.format.extent | 807-813 | - |
dc.language.iso | eng | - |
dc.source | Scopus | - |
dc.subject | Electric current control | - |
dc.subject | Electric power factor | - |
dc.subject | Electric power factor correction | - |
dc.subject | Power supply circuits | - |
dc.subject | Continuous inductor current mode | - |
dc.subject | High power factor boost rectifier | - |
dc.subject | Input current shaping | - |
dc.subject | Slope compensation | - |
dc.subject | Electric rectifiers | - |
dc.title | Analysis and design of constant-frequency peak-current-controlled high-power-factor boost rectifier with slope compensation | en |
dc.type | outro | - |
dc.contributor.institution | Universidade Estadual Paulista (UNESP) | - |
dc.description.affiliation | Paulista State Univ, Ilha Solteira | - |
dc.description.affiliationUnesp | Paulista State Univ, Ilha Solteira | - |
dc.identifier.doi | 10.1109/APEC.1996.500532 | - |
dc.identifier.wos | WOS:A1996BF10C00119 | - |
dc.rights.accessRights | Acesso restrito | - |
dc.relation.ispartof | Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC | - |
dc.identifier.scopus | 2-s2.0-0029757234 | - |
Aparece nas coleções: | Artigos, TCCs, Teses e Dissertações da Unesp |
Não há nenhum arquivo associado com este item.
Itens do Acervo digital da UNESP são protegidos por direitos autorais reservados a menos que seja expresso o contrário.