You are in the accessibility menu

Please use this identifier to cite or link to this item: http://acervodigital.unesp.br/handle/11449/65769
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFoschini, C. R.-
dc.contributor.authorJoshi, P. C.-
dc.contributor.authorVarela, José Arana-
dc.contributor.authorDesu, S. B.-
dc.date.accessioned2014-05-27T11:19:44Z-
dc.date.accessioned2016-10-25T18:15:42Z-
dc.date.available2014-05-27T11:19:44Z-
dc.date.available2016-10-25T18:15:42Z-
dc.date.issued1999-05-01-
dc.identifierhttp://dx.doi.org/10.1557/JMR.1999.0250-
dc.identifier.citationJournal of Materials Research, v. 14, n. 5, p. 1860-1864, 1999.-
dc.identifier.issn0884-2914-
dc.identifier.urihttp://hdl.handle.net/11449/65769-
dc.identifier.urihttp://acervodigital.unesp.br/handle/11449/65769-
dc.description.abstractWe report on the properties of BaBi2Ta2O9 (BBT) thin films for dynamic random-access memory (DRAM) and integrated capacitor applications. Crystalline BBT thin films were successfully fabricated by the chemical solution deposition technique on Pt-coated Si substrates at a low annealing temperature of 650°C. The films were characterized in terms of structural, dielectric, and insulating properties. The electrical measurements were conducted on Pt/BBT/Pt capacitors. The typical measured small signal dielectric constant and dissipation factor, at 100 kHz, were 282 and 0.023, respectively, for films annealed at 700°C for 60 min. The leakage current density of the films was lower than 10-9 A/cm2 at an applied electric field of 300 kV/cm. A large storage density of 38.4 fC/μm2 was obtained at an applied electric field of 200 kV/cm. The high dielectric constant, low dielectric loss and low leakage current density suggest the suitability of BBT thin films as dielectric layer for DRAM and integrated capacitor applications.en
dc.format.extent1860-1864-
dc.language.isoeng-
dc.sourceScopus-
dc.subjectAnnealing-
dc.subjectBarium compounds-
dc.subjectCapacitors-
dc.subjectCrystal structure-
dc.subjectCrystallization-
dc.subjectDeposition-
dc.subjectDynamic random access storage-
dc.subjectInsulating materials-
dc.subjectLeakage currents-
dc.subjectPermittivity-
dc.subjectPhase transitions-
dc.subjectThin films-
dc.subjectChemical solution deposition-
dc.subjectOrthorhombic phase-
dc.subjectDielectric films-
dc.titleProperties of BaBi2Ta2O9 thin films prepared by chemical solution deposition technique for dynamic random-access memory applicationsen
dc.typeoutro-
dc.contributor.institutionVirginia Tech.-
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.description.affiliationDept. of Mat. Sci. and Engineering Virginia Tech., Blacksburg, VA 24061-0237-
dc.description.affiliationInstituto de Química Universidade Estadual Paulista-UNESP, Araraquara, SP, 14801-970-
dc.description.affiliationUnespInstituto de Química Universidade Estadual Paulista-UNESP, Araraquara, SP, 14801-970-
dc.identifier.doi10.1557/JMR.1999.0250-
dc.identifier.wosWOS:000082550500026-
dc.rights.accessRightsAcesso restrito-
dc.identifier.file2-s2.0-0032674736.pdf-
dc.relation.ispartofJournal of Materials Research-
dc.identifier.scopus2-s2.0-0032674736-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.
 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.