You are in the accessibility menu

Please use this identifier to cite or link to this item: http://acervodigital.unesp.br/handle/11449/66497
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNascimento, Marcelino P-
dc.contributor.authorSouza, Renato C-
dc.contributor.authorMiguel, Ivancy M-
dc.contributor.authorPigatin, Walter L-
dc.contributor.authorVoorwald, Herman J.C-
dc.date.accessioned2014-05-27T11:20:15Z-
dc.date.accessioned2016-10-25T18:17:01Z-
dc.date.available2014-05-27T11:20:15Z-
dc.date.available2016-10-25T18:17:01Z-
dc.date.issued2001-04-16-
dc.identifierhttp://dx.doi.org/10.1016/S0257-8972(00)01148-8-
dc.identifier.citationSurface and Coatings Technology, v. 138, n. 2-3, p. 113-124, 2001.-
dc.identifier.issn0257-8972-
dc.identifier.urihttp://hdl.handle.net/11449/66497-
dc.identifier.urihttp://acervodigital.unesp.br/handle/11449/66497-
dc.description.abstractIn cases of decorative and functional applications, chromium results in protection against wear and corrosion combined with chemical resistance and good lubricity. However, pressure to identify alternatives or to improve conventional chromium electroplating mechanical characteristics has increased in recent years, related to the reduction in the fatigue strength of the base material and to environmental requirements. The high efficiency and fluoride-free hard chromium electroplating is an improvement to the conventional process, considering chemical and physical final properties. One of the most interesting, environmentally safer and cleaner alternatives for the replacement of hard chrome plating is tungsten carbide thermal spray coating, applied by the high velocity oxy-fuel (HVOF) process. The aim of this study was to analyse the effects of the tungsten carbide thermal spray coating applied by the HP/HVOF process and of the high efficiency and fluoride-free hard chromium electroplating (in the present paper called 'accelerated'), in comparison to the conventional hard chromium electroplating on the AISI 4340 high strength steel behaviour in fatigue, corrosion, and abrasive wear tests. The results showed that the coatings were damaging to the AISI 4340 steel behaviour when submitted to fatigue testing, with the tungsten carbide thermal spray coatings showing the better performance. Experimental data from abrasive wear tests were conclusive, indicating better results from the WC coating. Regarding corrosion by salt spray test, both coatings were completely corroded after 72 h exposure. Scanning electron microscopy technique (SEM) and optical microscopy were used to observe crack origin sites, thickness and adhesion in all the coatings and microcrack density in hard chromium electroplatings, to aid in the results analysis. © 2001 Elsevier Science B.V. All rights reserved.en
dc.format.extent113-124-
dc.language.isoeng-
dc.sourceScopus-
dc.subjectAbrasive wear-
dc.subjectCorrosion-
dc.subjectFatigue-
dc.subjectHard chromium electroplating-
dc.subjectHP/HVOF-
dc.subjectTungsten carbide thermal spray coating-
dc.subjectChemical resistance-
dc.subjectChromium-
dc.subjectCoatings-
dc.subjectFatigue testing-
dc.subjectOptical microscopy-
dc.subjectScanning electron microscopy-
dc.subjectTungsten-
dc.subjectWear of materials-
dc.subjectAbrasive wear test-
dc.subjectTungsten carbide thermal spray coatings-
dc.subjectElectroplating-
dc.subjectcoating-
dc.subjectcorrosion-
dc.subjectelectroplating-
dc.subjectfatigue-
dc.subjectspray-
dc.subjecttungsten carbide-
dc.titleEffects of tungsten carbide thermal spray coating by HP/HVOF and hard chromium electroplating on AISI 4340 high strength steelen
dc.typeoutro-
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.contributor.institutionUniversidade de São Paulo (USP)-
dc.contributor.institutionEMBRAER-LIEBHERR/EDE-
dc.description.affiliationState University of São Paulo- DMT-UNESP/FEG, Av. Ariberto Pereira da Cunha, 333-Guaratingueta/SP/-
dc.description.affiliationFAENQUIL/DEMAR, Lorena/SP/BR-CEP:12600-000-
dc.description.affiliationEMBRAER-LIEBHERR/EDE, Sao Jose dos Campos/SP/-
dc.description.affiliationUnespState University of São Paulo- DMT-UNESP/FEG, Av. Ariberto Pereira da Cunha, 333-Guaratingueta/SP/-
dc.identifier.doi10.1016/S0257-8972(00)01148-8-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofSurface and Coatings Technology-
dc.identifier.scopus2-s2.0-0035897255-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.
 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.