You are in the accessibility menu

Please use this identifier to cite or link to this item: http://acervodigital.unesp.br/handle/11449/67584
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAraújo, E. M.-
dc.contributor.authorHage, E.-
dc.contributor.authorCarvalho, A. J. F.-
dc.date.accessioned2014-05-27T11:21:00Z-
dc.date.accessioned2016-10-25T18:19:15Z-
dc.date.available2014-05-27T11:21:00Z-
dc.date.available2016-10-25T18:19:15Z-
dc.date.issued2003-12-05-
dc.identifierhttp://dx.doi.org/10.1002/app.13013-
dc.identifier.citationJournal of Applied Polymer Science, v. 90, n. 10, p. 2643-2647, 2003.-
dc.identifier.issn0021-8995-
dc.identifier.urihttp://hdl.handle.net/11449/67584-
dc.identifier.urihttp://acervodigital.unesp.br/handle/11449/67584-
dc.description.abstractThe ductile-brittle transition temperatures were determined for compatibilized nylon 6/acrylonitrile-butadiene-styrene (PA6/ABS) copolymer blends. The compatibilizers used for those blends were methyl methacrylate-co-maleic anhydride (MMA-MAH) and MMA-co-glycidyl methacrylate (MMA-GMA). The ductile-brittle transition temperatures were found to be lower for blends compatibilized through maleate modified acrylic polymers. At room temperature, the PA6/ABS binary blend was essentially brittle whereas the ternary blends with MMA-MAH compatibilizer were supertough and showed a ductile-brittle transition temperature at -10°C. The blends compatibilized with maleated copolymer exhibited impact strengths of up to 800 J/m. However, the blends compatibilized with MMA-GMA showed poor toughness at room temperature and failed in a brittle manner at subambient temperatures.en
dc.format.extent2643-2647-
dc.language.isoeng-
dc.sourceScopus-
dc.subjectAcrylonitrile-butadiene-styrene-
dc.subjectBlends-
dc.subjectCompatibilization-
dc.subjectNylon 6-
dc.subjectToughness-
dc.subjectAmines-
dc.subjectComposition effects-
dc.subjectCopolymers-
dc.subjectImpact testing-
dc.subjectNylon polymers-
dc.subjectOrganic acids-
dc.subjectPhase transitions-
dc.subjectPolymer blends-
dc.subjectTemperature-
dc.subjectCompatibilizers-
dc.subjectCompatibilizing agents-
dc.subjectDuctile-brittle transitions-
dc.subjectMaleated copolymers-
dc.subjectABS resins-
dc.subjectmechanical property-
dc.subjectnylon 6-
dc.subjectpolymer blend-
dc.titleEffect of compatibilizer in acrylonitrile-butadiene-styrene toughened nylon 6 blends: Ductile-brittle transition temperatureen
dc.typeoutro-
dc.contributor.institutionUniversidade Federal de Campina Grande (UFCG)-
dc.contributor.institutionUniversidade Federal de São Carlos (UFSCar)-
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.description.affiliationDepartment of Materials Engineering Univ. Federal de Campina Grande, Campina Grande PB-58109-970-
dc.description.affiliationDepartment of Materials Engineering Universidade Federal de Sao Carlos, Sao Carlos SP-13565-905-
dc.description.affiliationInstitute of Chemistry of Sao Carlos Universidade do Estado de Sao Paulo, Sao Carlos SP-13560-970-
dc.identifier.doi10.1002/app.13013-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofJournal of Applied Polymer Science-
dc.identifier.scopus2-s2.0-0242368821-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.
 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.