You are in the accessibility menu

Please use this identifier to cite or link to this item: http://acervodigital.unesp.br/handle/11449/68110
Full metadata record
DC FieldValueLanguage
dc.contributor.authorCavalcante, Erinaldo Hilário-
dc.contributor.authorGiacheti, Heraldo Luiz-
dc.contributor.authorBezerra, Raimundo Leidimar-
dc.date.accessioned2014-05-27T11:21:16Z-
dc.date.accessioned2016-10-25T18:20:25Z-
dc.date.available2014-05-27T11:21:16Z-
dc.date.available2016-10-25T18:20:25Z-
dc.date.issued2005-01-01-
dc.identifier.citationSolos e Rochas, v. 28, n. 1, p. 115-129, 2005.-
dc.identifier.issn0103-7021-
dc.identifier.urihttp://hdl.handle.net/11449/68110-
dc.identifier.urihttp://acervodigital.unesp.br/handle/11449/68110-
dc.description.abstractThis paper presents and discusses Ménard Pressuremeter test results used to predict bearing capacity of pounded piles installed in a tropical sandy soil. Fifteen pre-bored pressuremeter tests were carried out at the Experimental Research Site from Unesp - Bauru up to 15 m depth, one test per meter. Several laboratory and in situ tests were carried out in this research site as well as load tests on plates and on piles. Pressuremeter test results were firstly analyzed to determine geotechnical soil parameters based on empirical methods, emphasizing the estimative of the earth pressure coefficient at rest (K0). After that, bearing capacity prediction of pounded piles with 4 m, 7 m and 10 m were made and compared with test results from instrumented load tests. Pressuremeter test results allowed a very good estimative of bearing capacity for the pile with 4 m length and underestimated in 25,7% and 20,0% the bearing capacity for the pile with 7 and 10 m length, respectively. The back analysis of the test results suggests that the appropriate value for the bearing capacity factor for the tested soil-pile system on this soil is equal to 2.en
dc.format.extent115-129-
dc.language.isopor-
dc.sourceScopus-
dc.subjectBearing capacity-
dc.subjectIn situ testing-
dc.subjectPiles-
dc.subjectPMT-
dc.subjectTropical soils-
dc.subjectGeotechnical engineering-
dc.subjectLoad testing-
dc.subjectPlates (structural components)-
dc.subjectPressure measurement-
dc.subjectSand-
dc.subjectSoils-
dc.subjectGeotechnical parameters-
dc.subjectPounded piles-
dc.subjectPressuremeter testing-
dc.subjectTropical sandy soil-
dc.titleParâmetros geotécnicos e previsão da capacidade de carga de estacas apiloadas em solo tropical arenoso obtidos com o Pressiômetro Ménardpt
dc.title.alternativeGeotechnical parameters and prediction of bearing capacity of pounded piles in tropical sandy soil obtained with Ménard Pressuremeter testingen
dc.typeoutro-
dc.contributor.institutionUniversidade Federal de Sergipe (UFS)-
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)-
dc.contributor.institutionATECEL-
dc.description.affiliationDepartamento de Engenharia Civil Universidade Federal de Sergipe, Av. Mal. Rondon, S/N, 49000-000 Sao Cristovao, SE-
dc.description.affiliationFaculdade de Engenharia Unesp, Caixa Postal 473, 17033-360 Bauru, SP-
dc.description.affiliationATECEL, Rua Joao Juliao Martins, 179, 58109-090 Campina Grande, Pb-
dc.description.affiliationUnespFaculdade de Engenharia Unesp, Caixa Postal 473, 17033-360 Bauru, SP-
dc.rights.accessRightsAcesso restrito-
dc.relation.ispartofSolos e Rochas-
dc.identifier.scopus2-s2.0-31944435104-
Appears in Collections:Artigos, TCCs, Teses e Dissertações da Unesp

There are no files associated with this item.
 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.